Thursday, September 8, 2011
Quilted Logcabin Coaster Tutorial
This was originally published as a guest tutorial on Sew We Quilt.
Sewing Level: Beginner Friendly
- Scraps or fat quarters of 5 different fabrics
- Batting scraps
- Coordinating or neutral thread
- Basting or adhesive spray
- Fray check
From focal fabric, cut:
(4) 2.5" squares
(4) 4.5" squares
From each remaining fabrics, cut:
(1) 2.5"x1.5" piece
(2) 3.5"x1.5" piece
(1) 4.5"x1.5" piece
From batting, cut:
(4) 4" squares
Seam Allowance: 1/4"
Cut all your pieces! Once they're all cut, separate into 4 piles, with one of each size, and two 3.5" pieces. Make sure you evenly disperse your prints, one of each for each coaster!
I've created this little diagram to help you visualize steps 1-4, sewing together your coaster top!
1. Now, you're going to start by sewing together one 2.5" square and one 2.5"x1.5" piece. Press seams open.
2. Next, moving clock-wise around the center square, sew on one of the 3.5"x1.5" pieces to the bottom. Press.
3. Sew the other 3.5"x1.5" piece to the next side. Press.
4. Sew the 4.5"x1.5" piece to the final side and press. Now you've got the top of one coaster finished!
5. Repeat steps 1-4 for the remaining three coasters!
6. Grab one of your coaster tops, backing square, and batting square.
7. Spray adhesive to one side of the batting.
8. Arrange batting (adhesive side down), to the wrong side of your backing square.
9. Now place your backing and top right sides together. Pin. Sew around all four edges, leaving at least a 1.5" opening on one side for turning. Back-stitch when you start and finish.
10. Clip the seam allowance in your corners. Turn your coaster right side out, using a dull pencil or turning tool to poke out the corners. Pin the opening closed.
11. Stitching very close to the edge, top stitch all the way around your coaster, closing the opening. Back-stitch at start and finish.
12. Now it's time to quilt! You don't need a fancy foot or anything, for this simple quilting, your regular machine foot is fine. Simply back-stitch at the beginning and end of your quilting lines. Take advantage of your needle-down function to make it easier!
I used a variety of quilting designs for my coasters: shadow quilting (1/4" on either side of each seam), boxy swirl, random diagonal lines and diagonal center crossing.
13. Now trim all those little threads, and fray check your back-stitches for extra security! :)