Happy Tuesday! Today I have a little tutorial for this long scrappy pincushion to share with you!

This project was made entirely from scraps, including the batting and interfacing! It's perfect for using up those long skinny batting scraps that you end up with after trimming down a quilt. I made mine using the quilt as you go (QAYG) method, but you can just as easily sew the pieces together in a long strip and then quilt it all at once. Totally up to you!
Have questions about making pincushions? Check out my All About Pincushions post.
Sewing Level: Beginner Friendly
Finished Size: 1.5"x16"
Materials:
- (8) 2"x2" squares of print fabric
- (2) 2"x2.5" rectangles of print fabric for ends
- (1) 2"x16.5" strip of backing fabric
- (1) 2"x16.5" strip of lightweight interfacing
- 4"x18" batting scrap
- Pincushion filling (I used crushed walnut shells.)
Looking for supplies? Check out my Pattern Supplies and Resources post.
Instructions:
*Use a 1/4" seam allowance unless otherwise noted.*
1. Arrange print squares and rectangles in a single row, with the rectangle pieces at each end.
2. Place the first rectangle piece right sides up on your batting scrap. Using a walking foot, quilt the scrap in place.
Press square away from the quilted rectangle. Quilt in place.
Continue in this way with the remaining squares, ending with the other rectangle piece.
4. Trim the quilted piece down to 2"x16.5". You may find that your piece is a little less than 16.5" long, due to seam allowances being slightly larger or shrinking from the quilting, that's okay! Just trim it down to size and trim the backing/interfacing too.
5. Apply interfacing to the backing piece according to the manufacturer's instructions.
6. Place pincushion top and backing right sides together, clipping or pinning around all four edges.
7. Sew around all four edges, leaving about a 2" opening in the center of one long side. I find this makes turning easier than leaving the opening at one of the ends.
8. Trim the seam allowance to 1/8" at the corners.
10. Fill pincushion with desired filling.
11. Using a hand sewing needle and matching thread, stitch the opening closed.
All done!
Hope you enjoyed the tutorial! If you make a pincushion, please tag me on Instagram! I'm @jenib320 and my hashtag is #jenibaker.
Happy Sewing!
Useful and pretty. I'm definitely going to make one of these. Thank you!
ReplyDeleteYay! :)
DeleteI've made some skinny pin cushions, but never a long one. Great idea!! I really like the subdued rainbow vibe you've got going on. And that sweet yellow (fussy cut) bicycle print? LOVE!!!
ReplyDeleteThanks! It's from Weekends by Erin McMorris, a real favorite!
DeleteGreat idea! Thanks for sharing the pattern.
ReplyDeleteI love this project and feel like I kinda need one in front of my sewing machine now! Thanks for the tutorial!
ReplyDeleteIs the interfacing part important to the project? I would have to buy some.
ReplyDeleteYou can skip it if you'd like!
DeleteFelt might work as well if you have any
DeleteI need to make one. Thank you for great "How to". Is it instant coofee I can see as filler, because I can almost smell the nice smell. I must make my one cup now :)
ReplyDeleteThat would smell very nice, but it's actually crushed walnut shells!
DeleteWhere can I find crushed walnut shells?
ReplyDeleteYou can buy them at pet stores (it's sold as lizard litter) or on amazon!
DeleteYour works are beautiful-epic!!!!
ReplyDeleteI'm going to make one but I'll add a flap to under my machine so it stays in place. Great idea
ReplyDeleteThe flap is a great idea
Delete